Skip to main content
  • Due to the National Independence Day holiday on November 11, all orders placed after November 7 at 10:00 a.m. CEST will be processed starting Wednesday, November 12.
English €
Wishlist
Cart
  • FIBERLOGY_HD_PLA-175-085-Black-side.jpg
  • FIBERLOGY_HD_PLA-175-085-Black-front.jpg
  • FIBERLOGY_HD_PLA-175-085-Black-box.jpg
By purchasing this product, you will receive 305 loyalty program points if you are a registered customer.

HD PLA Filament - 2.85 mm - 0.85 kg - Old-type spool

LAST UNITS! Filament wound on an old-type spool. Spool dimensions: 200 mm x 84 mm. The spool is not compatible with BambuLab AMS but can be used with BambuLab AMS Lite.

With our HD PLA, you get many more possibilities. This filament can be used in two ways – the choice is yours. You can use it as regular PLA to achieve prints with excellent layer adhesion and high precision. Or you can modify your print to gain ABS-like properties – greater impact resistance and higher temperature tolerance.

Go to full description
Go to Product feedback

Select product variant

Individual variants may differ in price

Select Black
The presented colors are for reference only and may differ from the actual filament color depending on screen settings.
with VAT without VAT
€14.72
incl. 23% VAT
Regular price: €22.65
The lowest price during 30 days prior to the reduction: €22.65
The promotion runs until 31 December 2025

Shipping costs are not included in the price.

Availability:
only a few left
psc
Ask about the product
Share

Product description

LAST UNITS! Filament wound on an old-type spool. Spool dimensions: 200 mm x 84 mm. The spool is not compatible with BambuLab AMS but can be used with BambuLab AMS Lite.

With our HD PLA, you get far more possibilities. This filament can be used in two different ways – the choice is yours. You can use it as standard PLA to achieve prints with excellent layer adhesion and high precision. Or you can give your print ABS-like properties – better impact resistance and higher temperature tolerance. All you need is a regular oven. Yes, an oven! By annealing our HD PLA according to the instructions, you can avoid the inconveniences of printing with ABS, such as unpleasant odor or harmful fumes.

Properties:

  • biodegradable
  • slightly glossy surface
  • can be annealed in an oven to achieve ABS-like properties
  • increased impact and heat resistance after annealing

Old type Fiberlogy spool

Recommendations and tips

Print settings

  • Printing temperature 200-230°C
  • Bed temperature 50-70°C
  • Build surface PEI
  • Drying conditions 50°C / 4h
  • Enclosure not required
  • Cooling fan 75-100%
  • Maximum recommended print speed 100 mm/s

RAL/Pantone

To make it easier to choose the right color variant, we provide RAL and Pantone equivalents for filaments wherever possible. The given values are approximate and are intended to reflect the actual filament shade as closely as possible.

Why not HEX?

Providing the color of 3D printing filament in HEX format does not make sense because this notation was created to describe colors displayed on screens (RGB – monitors, TVs, mobile devices). HEX defines a mix of red, green and blue light, meaning a digital color. With filaments, however, we deal with a physical material. The same filament may look different in various photos and HEX cannot accurately represent the actual appearance of the material.

Much better references are color systems used in printing and industry, such as RAL or Pantone, which are based on real samples and allow for comparison of colors in physical reality.

User reviews

Number of ratings: 0
Rate and review