PRINT ECO

ABS properties:

• high hardness
• high impact resistance
• resistance to high temperatures and abrasion
• can be processed mechanically and chemically

How to print ABS?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	250-265°C
Bed Temperature	90-110°C
Closed chamber	recommended
Fan	0-10%
Flowrate	95-105%
Printing Speed	35-60 mm/s
Surface	glass, kapton tape, ABS juice
Retraction (direct)	2-3 mm
Retraction (bowden)	4-6 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h

 

Fiberlogy ABS has been positively assessed in the Open Filament Program (OFP) project run by Raise3D:

• Raise3D E2CF

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm	+/- 0.02 mm	+ 0.01 mm	250-265 °C	90-110°C

Colors: REFILL ABS

EASY PET-G properties:

• ease of printing
• high durability
• low susceptibility to shrinkage and flossing
• resistance to acids, salts, alkaline substances
• odorless

How to print EASY PET-G?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	220-250°C
Bed Temperature	90°C
Closed chamber	not required
Fan	0-25%
Flowrate	95-105%
Printing Speed	< 100 mm/s
Surface	masking tape
Retraction (direct)	2-3 mm
Retraction (bowden)	3-5 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h
Notes	Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm	+/- 0.02 mm	+ 0.01 mm	220-250°C	90°C

Colors: REFILL EASY PET-G

Refill EASY PLA properties:

• biodegradability
• very good adhesion between the print layers

How to print EASY PLA Refill?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	200-230°C
Bed Temperature	50-70°C
Closed chamber	not required
Fan	75-100%
Flowrate	90-100%
Printing Speed	< 100 mm/s
Surface	glass, masking tape
Retraction (direct)	2-3 mm
Retraction (bowden)	4-6 mm
Retraction Speed	20-45 mm/s
Drying conditions	50°C / 4h
Profiles	Bambu Lab X1C/P1S/P1P/A1/A1Mini
Notes	Easy PLA White – due to the dye, the suggested minimum printing temperature is 230°C

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm	+/- 0.02	+ 0.01	200-230°C	50-70°C

Colors: REFILL EASY PLA

PCTG properties:

• high impact strength (up to 20 times greater than PET-G)
• high chemical resistance
• high optical transparency
• easy to print – dimensional stability and low shrinkage
• suitable for contact with food – BPA free

How to print PCTG?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	250-270°C
Bed Temperature	90-110°C
Closed chamber	not required
Fan	0-25%
Flowrate	90-100%
Printing Speed	< 100 mm/s
Surface	masking tape, PVA glue, hairspray
Retraction (direct)	1-2 mm
Retraction (bowden)	4-6 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h
Notes	Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.

 

Fiberlogy PCTG has been positively assessed in the Open Filament Program (OFP) project run by Raise3D:

• Raise3D Pro3

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75mm	+/- 0.02 mm	+ 0.01 mm	250-270°C	90-110°C

Colors: REFILL PCTG

R ABS properties:

• high hardness
• high impact resistance
• resistance to high temperatures and abrasion
• can be processed mechanically and chemically

How to print R ABS?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	250-265°C
Bed Temperature	90-110°C
Closed chamber	recommended
Fan	0-10%
Flowrate	95-105%
Printing Speed	35-60 mm/s
Surface	glass, kapton tape, ABS juice
Retraction (direct)	2-3 mm
Retraction (bowden)	4-6 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm	+/- 0.02 mm	+ 0.01 mm	250-265°C	90-110°C

Colors: REFILL R ABS