Matte ASA properties:
- matte finish that hides layer lines
- resistance to weather conditions, moisture and UV light
- withstands temperatures up to 94°C
- low shrinkage
- ease to print
- low odor emission

ASA vs Matte ASA
How to print Matte ASA?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
Nozzle Temperature | 255-270°C |
Bed Temperature | 90-110°C |
Closed chamber | not required |
Fan | 0-25% |
Flowrate | 95-100% |
Printing Speed | < 100 mm/s |
Surface | PEI, kapton tape |
Drying conditions | 80°C / 4h |
Notes | When printing without a heated chamber, it is recommended to avoid exposing the model to gusts of wind/drafts |
Profiles | TBD |
Diameter | Diameter tol | Oval tol | Printing temp | Table temp |
---|---|---|---|---|
1.75 mm | +/- 0.02 mm | + 0.01 mm | 255-270°C | 90-110°C |
Colors: Matte ASA

Olive Green

Black

Graphite

Gray

Natural