Properties:

• ease of printing
• high durability
• low susceptibility to shrinkage and flossing
• resistance to acids, salts, alkaline substances
• odorless

How to print?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	220-250°C
Bed Temperature	90°C
Closed chamber	not required
Fan	0-25%
Flowrate	95-105%
Printing Speed	< 100 mm/s
Surface	masking tape
Retraction (direct)	2-3 mm
Retraction (bowden)	3-5 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h
Notes	Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm (translucent)	+/- 0.02 mm	+ 0.01 mm	220-250°C	90°C
1.75 mm (non-translucent)	+/- 0.02 mm	+ 0.01 mm	220-250°C	90°C

Colors

Properties:

• ease of printing
• high durability
• low susceptibility to shrinkage and flossing
• resistance to acids, salts, alkaline substances
• odorless

How to print?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	220-250°C
Bed Temperature	90°C
Closed chamber	not required
Fan	0-25%
Flowrate	95-105%
Printing Speed	< 100 mm/s
Surface	masking tape
Retraction (direct)	2-3 mm
Retraction (bowden)	3-5 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h
Notes	Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm	+/- 0.02 mm	+ 0.01 mm	220-250°C	90°C

Colors