PETG+PTFE

PETG+PTFE – Lower Friction and High Durability in 3D Printing

PETG+PTFE was specifically designed for applications requiring low friction and increased wear resistance. By adding 10% PTFE (Teflon) into PET-G, we created a 3D printing filament with tribological properties*. This makes it an excellent choice for producing sliding elements and gears operating under low to moderate loads.

The material retains all the features that make PET-G filament highly valued: it is easy to print, offers high adhesion, is chemically resistant and exhibits excellent impact resistance. At the same time, the addition of PTFE significantly reduces friction, resulting in enhanced durability and extended lifespan of printed components. The filament is heat-resistant up to 70°C.

PETG+PTFE is a reliable filament for engineering and industrial applications where friction reduction and wear resistance are the key factors. It is ideal for creating both functional prototypes and end-use parts.

*Tribology is the science and engineering of understanding friction, lubrication and wear phenomena for interacting surfaces in relative motion.

3D PRINTING APPLICATIONS:

  • PROTOTYPES: Functional prototypes, conceptual models
  • SPARE PARTS: Guides, bushings, washers, sleeves, gripping elements
  • MOVING COMPONENTS: Bearings, joints, gears, axles, rollers
PETG+PTFE
Diameter Net weight Colors
1.75 mm 0.75 kg
TDS Ask for a product
Expand the description
Find a store

PETG+PTFE properties:

  • tribological properties – reduced friction
  • heat resistance up to 70°C
  • easy to print
  • chemical resistance
  • excellent layer adhesion

 

How to print PETG+PTFE?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

Nozzle Temperature 220-240°C
Bed Temperature 90°C
Closed chamber not required
Fan 0-25%
Flowrate 90-95%
Printing Speed < 100 mm/s
Surface masking tape
Drying conditions 60°C / 4h
Profiles TBD

 

Diameter Diameter tol Oval tol Printing temp Table temp
1.75 mm + 0.01 mm +/- 0.02 mm 220-240°C 90°C

Colors: PETG+PTFE

Fiberlogy PETG+PTFE Natural

Natural

Find a store
Fourth dimension
of printing