Impact PLA properties:
- increased impact strength compared to PLA (up to 800%) and ABS (up to 50%)
- parameters exceeding the ABS
- precise reproduction of details
- very good adhesion
How to print Impact PLA?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
Nozzle Temperature | 220-245°C |
Bed Temperature | 50-70°C |
Closed chamber | not required |
Fan | 75-100% |
Flowrate | 90-100% |
Printing Speed | < 100 mm/s |
Surface | glass, masking tape |
Retraction (direct) | 2-3 mm |
Retraction (bowden) | 4-6 mm |
Retraction Speed | 20-45 mm/s |
Drying conditions | 50°C / 4h |
Fiberlogy Impact PLA has been positively assessed in the Open Filament Program (OFP) project run by Raise3D:
Diameter | Diameter tol | Oval tol | Printing temp | Table temp |
---|---|---|---|---|
1.75 mm | +/- 0.02 mm | + 0.01 mm | 220-245°C | 50-70°C |
Colors: IMPACT PLA

Black

Onyx

Vertigo

Army Green

Olive Green

Khaki

Light Green

Blue

Red

Orange

Yellow

Graphite

Gray

White