Properties:

• high hardness
• high impact resistance
• resistance to high temperatures and abrasion
• can be processed mechanically and chemically

How to print?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	250-265°C
Bed Temperature	90-110°C
Closed chamber	recommended
Fan	0-10%
Flowrate	95-105%
Printing Speed	35-60 mm/s
Surface	glass, kapton tape, ABS juice
Retraction (direct)	2-3 mm
Retraction (bowden)	4-6 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h

 

Fiberlogy ABS has been positively assessed in the Open Filament Program (OFP) project run by Raise3D:

• Raise3D E2CF

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm	+/- 0.02 mm	+ 0.01 mm	250-265 °C	90-110°C
2.85 mm	+/- 0.02 mm	+ 0.01 mm	250-265°C	90-110°C

Colors

Properties:

• high hardness
• high impact resistance
• resistance to high temperatures and abrasion
• can be processed mechanically and chemically

How to print?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	250-265°C
Bed Temperature	90-110°C
Closed chamber	recommended
Fan	0-10%
Flowrate	95-105%
Printing Speed	35-60 mm/s
Surface	glass, kapton tape, ABS juice
Retraction (direct)	2-3 mm
Retraction (bowden)	4-6 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h

 

Fiberlogy ABS has been positively assessed in the Open Filament Program (OFP) project run by Raise3D:

• Raise3D E2CF

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm	+/- 0.02 mm	+ 0.01 mm	250-265 °C	90-110°C

Colors