EASY PLA
Properties:
- biodegradability
- very good adhesion between the print layers
How to print?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
Nozzle Temperature | 200-230°C |
Bed Temperature | 50-70°C |
Closed chamber | not required |
Fan | 75-100% |
Flowrate | 90-100% |
Printing Speed | < 100 mm/s |
Surface | glass, masking tape |
Retraction (direct) | 2-3 mm |
Retraction (bowden) | 4-6 mm |
Retraction Speed | 20-45 mm/s |
Notes | Easy PLA Aurora – recommended minimum 0,5 mm nozzle Easy PLA White – due to the dye, the suggested minimum printing temperature is 230°C |
Diameter | Diameter tol | Oval tol | Printing temp | Table temp |
---|---|---|---|---|
1.75 mm | +/- 0.02 mm | + 0.01 mm | 200-230°C | 50-70°C |
2.85 mm | +/- 0.02 mm | + 0.01 mm | 200-230°C | 50-70°C |