- twice the tensile strength of Nylon PA12
- more than twice the stiffness of Nylon PA12
- higher thermal resistance compared to unmodified Nylon PA12 (up to 160°C)
- high chemical resistance
HOW TO PRINT:
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
|Closed chamber||not required|
|Printing Speed||35-60 mm/s|
|Surface||glass, masking tape|
|Retraction (direct)||2-3 mm|
|Retraction (bowden)||4-6 mm|
|Retraction Speed||20-45 mm/s|
|Drying conditions||80°C / 4h|
|Notes||The material has highly abrasive properties. We recommend the use of hardened steel or ruby nozzles.
Wear gloves (the possibility of micro damages on the skin). Use a dust mask and protective glasses when processing.
Fiberlogy Nylon PA12+CF15 has been positively assessed in the Open Filament Program (OFP) project run by Raise3D:
|Diameter||Diameter tol||Oval tol||Printing temp||Table temp|
|1.75 mm | 2.85 mm||+/- 0.02 mm||+ 0.02 mm||255-270°C||90-110°C|