Properties:

• high hardness
• high impact resistance
• resistance to high temperatures and abrasion
• can be processed mechanically and chemically

How to print?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	250-265°C
Bed Temperature	90-110°C
Closed chamber	recommended
Fan	0-10%
Flowrate	95-105%
Printing Speed	35-60 mm/s
Surface	glass, kapton tape, ABS juice
Retraction (direct)	2-3 mm
Retraction (bowden)	4-6 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm	+/- 0.02 mm	+ 0.01 mm	250-265°C	90-110°C

Colors

PROPERTIES:

• High resistance to high temperatures and chemical compounds
• High flexibility
• Resistant to abrasion

 

HOW TO PRINT:

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	255-270°C
Bed Temperature	100°C
Closed chamber	required
Fan	0-10%
Flowrate	95-105%
Printing Speed	35-60 mm/s
Surface	glass, PVA glue, hairspray
Retraction (direct)	2-3 mm
Retraction (bowden)	4-6 mm
Retraction Speed	20-45 mm/s
Drying conditions	70°C / 4h

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm	+/- 0.02 mm	+ 0.01 mm	255-270°C	100°C

Colors

Properties:

• high durability
• low shrinkage
• resistance to acids, salts, alkalic substances

How to print?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	220-250°C
Bed Temperature	90°C
Closed chamber	not required
Fan	0-25%
Flowrate	95-105%
Printing Speed	35-60 mm/s
Surface	masking tape
Retraction (direct)	2-3 mm
Retraction (bowden)	3-5 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h
Notes	Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm	+/- 0.02 mm	+ 0.01 mm	220-250°C	90°C

Colors

LIMITED EDITION: The accessibility of filaments depends on objective factors, such as the amount of raw material available on the market. Therefore, the manufacturer cannot guarantee the continued availability of the goods. R PLA filament may contain traces of glitter and vary in the intensity of colouring, which results from the raw material used in a given batch.

Properties:

• biodegradability
• very good adhesion between the print layers

How to print?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	210-230°C
Bed Temperature	50-70°C
Closed chamber	not required
Fan	75-100%
Flowrate	95-105%
Printing Speed	< 100 mm/s
Surface	glass, masking tape
Retraction (direct)	2-3 mm
Retraction (bowden)	4-6 mm
Retraction Speed	20-45 mm/s
Drying conditions	50°C / 4h
Note	Recommended minimum 0,5 mm nozzle

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm	+/- 0.02 mm	+ 0.01 mm	210-230°C	50-70°C

Colors

Properties:

• non-toxic and odorless
• high resistance to chemicals
• resistance to mechanical damage
• very good adhesion between the print layers

How to print?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

 

Nozzle Temperature	220-250°C
Bed Temperature	not required when using a packing tape
Closed chamber	not required
Fan	0-50%
Flowrate	100-105%
Printing Speed	< 45 mm/s
Surface	packing tape
Retraction (direct)	2-3 mm
Retraction (bowden)	4-6 mm
Retraction Speed	20-45 mm/s

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm	+/- 0.02 mm	+ 0.01 mm	220-250°C	not required

Colors