- semi-matte finish with a subtle gloss
- perfect hiding of layers
- rough texture
- easy to print like PLA
As an alternative to silk filaments, FiberSatin stands out with its semi-matte finish, which perfectly hides the boundaries between the layers of 3D prints. Thanks to this, the finished model gains a more noble appearance.
How to print FiberSatin?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
|Closed chamber||not required|
|Printing Speed||<60 mm/s|
|Surface||PEI, glass, masking tape|
|Retraction (direct)||2-3 mm|
|Retraction (bowden)||4-6 mm|
|Retraction Speed||20-45 mm/s|
|Drying conditions||40°C / 4h|
|Notes||Due to the strong adhesion, damage to the bed surface (eg PEI) may occur. We recommend printing on a tape.|
|Diameter||Diameter tol||Oval tol||Printing temp||Table temp|
|1.75 mm||+/- 0.02 mm||+ 0.01 mm||200-230°C||50°C|