MattFlex 40D properties:
- matte finish and low visibility of layers
- 40D Shore hardness
- very good thermal, chemical and abrasion resistance
- printing speed up to 60 mm/s
How to print MattFlex 40D?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
Nozzle Temperature | 210-230°C |
Bed Temperature | 50-70°C |
Closed chamber | not required |
Fan | 50-75% |
Flowrate | 105-110% |
Printing Speed | < 60 mm/s |
Surface | glass, masking tape |
Retraction (direct) | 1-2 mm |
Retraction Speed | 10-30 mm/s |
Drying conditions | 60°C / 4h |
Notes | To remove the print easier, it is recommended to heat the bed to 110°C |
Diameter | Diameter tol | Oval tol | Printing temp | Table temp |
---|---|---|---|---|
1.75 mm | +/- 0.05 mm | + 0.03 mm | 210-230°C | 50-70°C |
Colors: MATTFLEX 40D

Black

Blue

Red

Graphite

White