Matte PET-G properties:
- matte finish
- ease to print
- low susceptibility to shrinkage and stringing
- resistance to acids, salts, alkaline substances
- excellent hiding of the layer lines
How to print EASY PET-G?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
Nozzle Temperature | 250-270°C |
Bed Temperature | 90°C |
Closed chamber | not required |
Fan | 0-25% |
Flowrate | 95-105% |
Printing Speed | < 100 mm/s |
Surface | masking tape |
Retraction (direct) | 2-3 mm |
Retraction (bowden) | 3-5 mm |
Retraction Speed | 20-45 mm/s |
Drying conditions | 60°C / 4h |
Notes | Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.
As of April 2024, there has been a change in suggested printing temperatures. |
Profiles | Bambu Lab X1C/P1S Bambu Lab P1P Bambu Lab A1 Bambu Lab A1 Mini |
Diameter | Diameter tol | Oval tol | Printing temp | Table temp |
---|---|---|---|---|
1.75 mm | +/- 0.02 mm | + 0.01 mm | 250-270°C | 90°C |
Colors: Matte PET-G
Black
Graphite
Gray
White
Red
Blue