- high impact and tensile strength
- chemical and thermal resistance
- a matte finish that makes it easy to hide layers
- low shrinkage and the ability to print on open printers
How to print?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
|Closed chamber||not required|
|Printing Speed||35-60 mm/s|
|Surface||masking tape, PVA glue, hairspray|
|Retraction (direct)||1-2 mm|
|Retraction (bowden)||3-5 mm|
|Retraction Speed||20-45 mm/s|
|Drying conditions||60°C / 4h|
|Notes||Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.|
|Diameter||Diameter tol||Oval tol||Printing temp||Table temp|
|1.75 mm||+/- 0.02 mm||+ 0.01 mm||250-270°C||90-110°C|