PETG+PTFE Filament – S2
159.00 PLN gross
Fiberlogy PETG+PTFE is a 3D filament that combines the ease of printing of PET-G with a 10% PTFE (Teflon) additive, ensuring low friction, wear resistance, and extended service life for prints. It is ideal for sliding components, gears, and mechanical parts that require durability and reliability.
Fiberlogy PETG+PTFE is an advanced 3D printing filament that combines the ease of use and versatility of PET-G with tribological properties thanks to its 10% PTFE (Teflon) content. This material is designed for applications requiring low friction, increased wear resistance, and mechanical durability.
Thanks to its PTFE content, Fiberlogy PETG+PTFE enables the printing of sliding parts, guides, gears, and other components subjected to low or moderate loads, which are characterized by minimal friction and a longer service life. At the same time, the material retains all the advantages of PET-G: ease of printing, high adhesion to the build plate, chemical resistance, and good impact strength.
PETG+PTFE filament is heat-resistant up to 70°C, making it ideal for engineering and industrial functional applications. Its low shrinkage and dimensional stability allow for precise reproduction of even the most complex models.
Fiberlogy PETG+PTFE is ideal for:
- mechanical components requiring minimal friction,
- sliding parts and guides,
- low- or moderate-load gears,
- functional prototypes and end-use parts that must combine durability with reliability.
Fiberlogy PETG+PTFE is a filament that combines ease of printing, high strength, and tribological properties, offering a professional solution for engineering and industrial projects.
Tribological properties – reduced friction
Temperature resistance up to 70°C
Ease of printing
Chemical Resistance
Very good layer adhesion
Printing Parameters
- Printing temperature: 220–240°C
- Bed temperature: 90°C
- Bed material: Smooth PEI + adhesive; Textured PEI; Glass + adhesive
- Curing conditions: 60°C / 4 hours
- Enclosed chamber: not required
- Airflow: 0–25%
Technical Specifications
- Density: 1.32 g/cm³
- Charpy impact strength (notched) @ 23°C: 6 kJ/m² (ISO 179)
- Tensile strength at yield: 40 MPa (ISO 527)
- Tensile strength at break: 25 MPa (ISO 527)
- Tensile modulus: 1,850 MPa (ISO 527)
- Elongation at yield: 3.7% (ISO 527)
- Elongation at break: >100% (ISO 527)
- Charpy impact strength (unnotched) @ 23°C: NB (ISO 179)
-
Natural
Reviews
There are no reviews yet.