LIMITED EDITION: The accessibility of filaments depends on objective factors, such as the amount of raw material available on the market. Therefore, the manufacturer cannot guarantee the continued availability of the goods. R PLA filament may contain traces of glitter and vary in the intensity of colouring, which results from the raw material used in a given batch.
Properties:
- biodegradability
- very good adhesion between the print layers
How to print?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
Nozzle Temperature | 210-230°C |
Bed Temperature | 50-70°C |
Closed chamber | not required |
Fan | 75-100% |
Flowrate | 95-105% |
Printing Speed | < 100 mm/s |
Surface | glass, masking tape |
Retraction (direct) | 2-3 mm |
Retraction (bowden) | 4-6 mm |
Retraction Speed | 20-45 mm/s |
Note | Recommended minimum 0,5 mm nozzle |
Diameter | Diameter tol | Oval tol | Printing temp | Table temp |
---|---|---|---|---|
1.75 mm | +/- 0.02 mm | + 0.01 mm | 210-230°C | 50-70°C |