Filaments with matte finish - high quality and elegant design

Matte ASA properties:

• matte finish that hides layer lines
• resistance to weather conditions, moisture and UV light
• withstands temperatures up to 94°C
• low shrinkage
• ease to print
• low odor emission

How to print Matte ASA?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	255-270°C
Bed Temperature	90-110°C
Closed chamber	not required
Fan	0-25%
Flowrate	95-100%
Printing Speed	< 100 mm/s
Surface	PEI, kapton tape
Drying conditions	80°C / 4h
Notes	When printing without a heated chamber, it is recommended to avoid exposing the model to gusts of wind/drafts
Profiles	TBD

 

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm	+/- 0.02 mm	+ 0.01 mm	255-270°C	90-110°C

Colors: Matte ASA

Matte PET-G properties:

• matte finish
• ease to print
• low susceptibility to shrinkage and stringing
• resistance to acids, salts, alkaline substances
• excellent hiding of the layer lines

How to print EASY PET-G?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	250-270°C
Bed Temperature	90°C
Closed chamber	not required
Fan	0-25%
Flowrate	95-105%
Printing Speed	< 100 mm/s
Surface	masking tape
Retraction (direct)	2-3 mm
Retraction (bowden)	3-5 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h
Notes	Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape. As of April 2024, there has been a change in suggested printing temperatures.
Profiles	Bambu Lab X1C/P1S Bambu Lab P1P Bambu Lab A1 Bambu Lab A1 Mini

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm	+/- 0.02 mm	+ 0.01 mm	250-270°C	90°C

Colors: Matte PET-G

MattFlex 40D properties:

• matte finish and low visibility of layers
• 40D Shore hardness
• very good thermal, chemical and abrasion resistance
• printing speed up to 60 mm/s

How to print MattFlex 40D?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature	210-230°C
Bed Temperature	50-70°C
Closed chamber	not required
Fan	50-75%
Flowrate	105-110%
Printing Speed	< 60 mm/s
Surface	glass, masking tape
Retraction (direct)	1-2 mm
Retraction Speed	10-30 mm/s
Drying conditions	60°C / 4h
Notes	To remove the print easier, it is recommended to heat the bed to 110°C

Diameter	Diameter tol	Oval tol	Printing temp	Table temp
1.75 mm	+/- 0.05 mm	+ 0.03 mm	210-230°C	50-70°C

Colors: MATTFLEX 40D